Between 1957 and 1970 Cheoy Lee produced approximatley 133 folkboats originaly sold as the the Offshore 25, better known as the Frisco Flyer.

There were three versions of this small blue-water boat.
91 in all wood and 42 in Fiberglass with wood. There were 55 Type I's and II's and 78 of the Type III's. The Type I (aka the Pacific Clipper) was an all wood boat, had a mast that was stepped through the deck, a traditional folkboat fractional rig and a smaller cabin. The Type II's had a larger teak trunk cabin and a masthead rig. The Type III's had a larger teak dog-house cabin, some "standing" headroom and a masthead rig stepped on deck. The earlier Type III's were solid teak built onto a fiberglass hull and the later Type III’s (1966-1970) were made entirely out of fiberglass with teak paneling.

This boat, Yard # 1507 is one of approximatley only 30 Type III's left. It was out of the water for the previous 16 years when I got it and then about another 5 more while I rebuilt it. It was an empty, cracked hull when given to me and needed a complete restoration/refit.
It took about five years of long nights and weekends of working outside under a tarp, in the garage or in the boat during cold winter nights, wet rainy afternoons and everything in between. The occasionally eager assistant on the project was my four (now ten) year old daughter who can have this boat as soon as I convince her mother to get another one. This blog is the record of all the work that "we" have done to the boat as well as some other somewhat related events with friends and family. Eventually, this will be put together in a book which will stay with the boat.


She still has plenty more to go but for now, Jackaroe has been in the water for a couple years now and thats all that matters...

To see past projects, use the links below.



Questions and comments to Matthewearlgarthwait@gmail.com





Saturday, May 8, 2010

Gouges in hull …

Last year, I had cleaned out any large cracks in the gelcoat by scraping down into the gelcoat but not through into the fiberglass beneath. After that they were filled and I had been fairing them out along with any of the deeper dings and nicks that I found along the way. There were two or three small spots that needed to be cleaned out making sure to leave a nice text book West System 12-1 taper.

After spending a long time getting the hull back close to fair and close to painting, one afternoon I started to second guess the work I had done thinking that while it was pretty good it wasn’t as good as it could be. I started to think about water intrusion and those cracks being deeper than I really liked. Some were only through the gel coat but a lot were really all the way through or close to all the way through.


I grabbed and old style can opener, the one I had used last year (again, sage info from West System) and started to scrape the cracks open again but trying to go all the way through this time. Way too hard. I walked back into the shop (formally known as the garage) and grabbed a Dremel type tool. I put a carbide or diamond tip on it and in less than an hour, I had 200, 10 inch long, ¼ deep gouges…on each side. That seemed to work much better but the boat looked worse than ever.

The weather was good and dry so I didn’t have to fill them right away and I could sneak away to a friend’s for dinner with the girls. Later that evening, when we got back but before reading Maya a bedtime story, I mixed up a big batch of West system and micro balloons and filled them all up.


They sat that way for a few days and last night before the rainstorm, I was able to start sanding the excess off and hopefully tonight I’ll get to the other side and then finish filling them in.



After all this, the boat will look them same as it did a week ago, looking close to fair and close to painting but this time I know that these small cracks will never open up and let in any water. That doesn’t mean others won’t show up but if they do, it should only be a couple. Its funny, if I had a finished sailboat and found my hull looking like this one day, I would probably have a heart attack, but nothing seems to faze me these days with boat projects…hopefully they never will after all of this.

Saturday, May 1, 2010

Tape removal...

Maya has been dying to do something with me on the boat and I feel bad that I keep having to tell her that she cant help out because of either the chemicals or fiberglass. I wonder how different it would be if this was a wooden boat... if I was working with wood, pine tar etc, would she have more of an opportunity to work with me? Maybe, but for now shes being patient with the process. I put aside any deck or hull work so that she could be around. She went straight to work pulling up any of the old tape that was still down from last years high build primer.




Deck..




Saturday, April 24, 2010

Frisco Flyer trip blog...

While looking of something else I came across this link to a trip blog and the boat is a Cheoy Lee Frisco Flyer named Sumatra....

http://sailing-sumatra.livejournal.com/

Thursday, April 15, 2010

Cabin house leaks....

There were two small leaks in thecabin house ceiling. when ever it rqained, there were two small trickles of water on the Port side that seemed to be coming in from the area where the fiberglass cloth on the roof meets the walls of the house. Covering that edge of fiberglass was a piece of molding. I took off a piece of the molding to look under neath and when I saw how there wasnt much of an edge to speak off and that the sealent that was used was spent and no longer keeping any water out.. I was suyrprised that I didnt have more leaks. So i ripped off teh rest of teh molding and decided that what I'll do is get some thin veneers/laminate and wrap the wall in this, bed that in some boat life or something, feather hat up against the fiberglass on the roof then add some glass on the roof and feather that over the "new walls".

After that, I'll repaint the roof and add a new piece of molding to cover that joint as well as the lower section where the walls meet the decking.

Some shots of the molding etc...

Lots of sanding before painting...

Now that I'm done fiberglassing the deck, I have lots of sanding to do before I can ever paint it. I started sanding the micro balloons and epoxy yesterday and relized just how long this next part will take in order to get the deck perfectly fair and level.

It sands easily enough, its just that I cant always see the high/low spots until its all been sanded which makes me think that I'll be sanding until sometime in May.

Someshots of the deck and hull/deck joint.....




Jackstands....

I havent moved the jackstandsfor a long time. As the weather has changed, they have settled into the ground. I've kept the boat level by adjusting them up or down, now it was time to move them out of place, replace the boards under them to support them and slide them back in...

So thats what I did. It can feel a little dangerous when ever I'm underthe boat dooing anything. there was one day when I had to work on the bottom of the keel and looking up it seemed as if the whole boat could come down on me in a second.

So far though...it hasnt happended yet...

Some pics..

Sunday, April 11, 2010

More deck pictures..


One more shot of the extra glass in the Winch area and on the rail


This is the first skim coat of epoxy and microballoons. Feels like it took forever to get to this point...

When this was all finally finished, I started to wonder if I had enough glass down on the 1/2 plywood decking. Was just one layer of glass all around, with another on the rails, bow etc? I spent the day stressing about this until I went to Steve's last night to help him slide in his 6 looong bilge stringers into Cicada. While there, I was looking at Cicada and talking to the guy that re did her deck 20 years ago or so and it was still going strong with one layer of glass over a 1/2 inch plywood deck. I feel better now. Cant wait to finish fairing the microbaloons and prep it for painting.......!

Small fingers...

Maya hasn't been able to help much lately because of al the epoxy and fiberglass but she jumped at the chance to clean the old tape off of the cleats left over from varnishing the cockpit area. My fingers are too big for this job and she wanted to help do anything before I started working with all the toxic stuff again...

Deck progress...

After a couple of rainy days there was another break of nice weather and I got a lot done on the decks. Once the last piece of glass was laid and cured, I sanded all the seams and gaps smooth, faired the edges as best I could to the hull, and did a overall all sanding to rough it up before putting on any more epoxy, then I put on a "skimcoat" mixture of epoxy and micro balloons on the deck and over the rail.


A shot of the rail after its second layer of cloth. I had about three inches on deck and two over the edge. The initial layer of cloth down had about three or four inches over the edge. This made sanding easier later.


This is a small extra section of glass where the winches are mounted. Steve gave me a small bit of Dynel. I had enough for the winch pads and the pulpit area..


The forward two thirds of the bow has an extra layer of Dynel and then there is the extra layer along the rails

When it was all sanded and wiped down, I had Maya take a couple pictures....

Tuesday, April 6, 2010

Fiberglass Deck....Finally!

So when the forecast called for 4-5 days of sunny warm weather, I knew I had to get the fiberglass on the decks now in order to get everything else finished for her to go in. I wanted to just get started with the epoxy but once I was out there, about to spread out the cloth, I realized that I had to grind/scrap, sand a few inches of the hull in order to make a stronger bond between the hull and deck. The hull is covered in a thick gel coat (thick on the port side but thinner on Stbd. for some reason. Probably has to do with when they were building up the hull in the mold back in 1965. Its so clearly thicker on one side that I'm guessing that afterthey sprayed the gelcoat, and then the glass, that the boat rested on its port side and the gelcoat settled more on that side? All just a guess.) and getting that gelcoat off is not easy. The best way was to use a 3 innc grinder and if I was careful, I could feather and smooth it from gelcoat to raw fiberglass hull. If I was in a rush to get back in the house to read a bedtime story or to make dinner for the girls, I would grind it in a real choppy rough way that was harder to sand smooth before the glass and epoxy went on.

Some pictures from the last few warm days...

Glass cut and ready to go...


Three inches or so of the gelcoat was grinded, sanded and wiped clean...


The deck was sanded flush/fair one last time, the transition from deck to sides was sanded smooth and wiped down....


Glass waiting for epoxy...

The weather really cooperated, warm sunny and no wind on the coast for once. Once I had the cloth cut to the rough shape that I needed, I made sure there was enough to extend over the edge to bond to the hull. Then I would mix up 5 or 6 oz of West System epoxy, pour it along the cabin house first and drizzle the rest out on the rest. Once the epoxy had really soaked in and set along the cabin house, I "Squegeed" the rest out away from the house towards the sides. This seemed to work great and I have to say that I ended up being pretty good at this. On the whole deck, I have only found one small bubble that I must have missed. Once the epoxy had kicked off and was getting set, I cut the excess cloth and peeled it off.



A couple days later...... the deck is fiberglassed!!

Ok, whats still left is...

1. sand the deck
2. run glass tape along the edges, cabinhouse and pulpit area
3. epoxy those areas and sand fair
4. mix up PLENTY of epoxy and microballoons, spread, fair and sand
5. do this a couple more times
6. high build paint?? not sure if this is overkill
6. or 7. epoxy paint.
7. or 8. re install, deck hardware
Done.

Sunday, March 28, 2010

stainless countertops...

This weekend, I spent Saturday pouring still more epoxy and sanding the deck fair. It takes so long for it to cure in this weather! It looks pretty good to me at this point and it will probably be all set for fiberglass. I can still fair it some more later if I think needs it.

On Sunday, I set about working on the counter tops. I ended up calling around to see if anyone knew where I could get some 316 Stainless sheeting. Steve had some left over from a project and after a few hours of cutting and grinding, the sink and faucet look great with the stainless counter tops...They're just dry fitted at this point and the stainless still needs to be bedded to to the plywood base. When that's done, I'll trim them out with teak molding and I guess it'll be time to check the sink through hull before plumbing it.

I finished in a hurry because the weather was starting to turn for the worse and I wanted to get the boat closed up so I didn't take any pictures. Maya and I will take a look at it tomorrow after work/school.

Wednesday, March 24, 2010

St. Lucia


New Gourd from a local.

Under the heading "other boats", I have to mention our recent trip to St. Lucia last month. We usualy go to spanish or british islands down there but were invited to connect with Maki's folks on St. Lucia, a small now independent island that changed from french to spanish about 14 times. their down in the islands again this winter on their Waquiez 40 named Mojito. A really nice spacious boat thats fast enough to make ever encounter with another boat into a small racing match. Even if theother boat doesnt know theyve been challenged.

Lee cloth up...rough nite but she never stirred.




Besides the fact that St. Lucia is new for us, it also appealed to us because of the hills. there are a couple on the island that reach a couple thousand feet, which seems much taller when they rise straight up out of the sea. The two most popular hills (or Pitons as there called there) are both climbable. The small one is harder and more technical but doable and the larger one is easier but you are required to use a guide (30 buck per person).



My girls...


Beba and Ba, our hosts








Tarp off for good?

So, the deck is just about ready for the fiberglass. I have to still level a spot here and there with epoxy/filler/sanding before doing anything else. It looks good and I’m kicking myself for taking so long to do it.


This is the first time that the tarp has been off the boat. I had made a replacement for the frame that the previous owner had made for it. This created a nice “room” to work in whenever the weather wasn't so dry. Even in the summers, I've had the tarp on the boat if there was over a 30% chance of rain. Now, with the decks watertight, I took of the tarp and as long as the companionway, port lights and forward hatch are closed tight or covered then everything should be dry…


A couple of shots of the boat without the tarp and the frame that has since been burned in the bonfire……


We’ll see. (I'm still expecting a few leaks)

Monday, March 22, 2010

Still prepping the deck...

Spring is on its way and the weather is starting to turn. The NH seacoast had a long dry spell of increasing warm weather and I started in on the decks again.


For a while, I've been trying to decide how to handle the deck. Originally, the boat came with a plywood underlayment with a teak deck. The previous owners might have ben planning to re-do the teak decking but I couldn't justify spending that much money on this when a fiberglass deck would be less of a hassle and less likely to leak. The plywood decking thats there now is appox 3/8" or so. Which leaves about a 1/8" of a difference between the deck and the hieght of the hull sides. I had read in a few sources that the thing to do would have been to make up the diference with another layer of ply before fairing it and putting on the cloth. I started down this road last fall i think and had all the pieces cut and coated with epoxy. But then of course I read a few opinons the other way saying that a deck that think was unnessisray and overkill. It seemed that plenty of larger boats have a deck of 3/8ths with fiberglass that have been more that strong enough for decades so I decided to go that way. Even though I had prepped all the pieces to go, I still thought it better to have the thinner deck and save weight of all that wood and epoxy. The next thought was how to handle the differenece in hieght between the hull side and the deck. I considered shaving the sides down with a grinder but decided to use microballons in the west system to fair out a nice smooth camber from the cabin sides to the rails (not too flat that it wont drain out the scuppers), rather than the steeper grade it would have been.
So in the interest in doing things right the first time, I have been spending a lot of time fairing out that area from cabin sides to the rails so that its smooth and even from side to side. I had enough light to get most of the epoxy down I wanted to but ran out of warm weather, dry weather and sun light to think about laying any cloth.

Me, sanding some epoxy and running out of day light.....
(note the no longer needed blue dress sock being used as a dust bag)

Monday, March 8, 2010

Decks started

We had a couple of 50 degree days here in NH, so I finally got around to the decks. I scratched and patched the ply that was down and then skim coated everything with West/microballon powder. I'll do this a couple times then sand it fair. The next couple of 50 degree days and I'll be able to lay the fiberglass down.
No pictures yet.

Sunday, January 24, 2010

wiring

So for the last day or two, I've been trying to figure out the best way to attack the wiring. I decided on making a small drawing to use as guide for buying the wire and also as a guide for the installation. It lays out what I expect to be in the boat for lights etc. It shows the different items, cabin lights, bilge etc, what each thing draws based on watts/volts and then shows which wire to use based on the circuit or run and color guide.

I went and bought the wiring and started installing it this afternoon.

Monday, January 18, 2010

interior lighting...

So this week, Ive been reconnecting with the boat and whats left to do with the remaining projects. There's not too much left but as with most things, I'm sure as I get into something, I'll realize that there is a lot more to do than I thought. I've got it set up now so that the boat is well lit and heated with a small electrical unit. I can turn this on for just 5 minutes before going out there and its comfortable to work in.
One thing I was trying to accomplish today was to get the old light fixtures (with new lights etc) wired. The boat came with two great interior main cabin lights, I'm not sure of the make but I'm hoping to keep them because of the great piece of glass each one has. The light up forward is more recent maybe 70's and although the lens is glass too, it looks like a lot of lights out there today.
The next step is to finish the shelves, counter tops, sink and companion way door. When these are done, I'll have to also get to the mast before my friend comes home and needs his barn again....

Sunday, January 3, 2010

2010 New Years resolution

Well, while I've done a couple of small things on the boat since the summer, it hasn't been much to speak of and sadly, none of it has been with Maya. I've been thinking of this boat's history over the last twenty years or so and how it's been the focus of on again and off again restoration projects and unfortunately then left alone until the next owner. So this new years resolution is basically just to recommit to this project. Like any resolution, I think I'll have to just do a little each day again to feel that its making some progress. At the rate its going, I'll have a mooring ready with no boat to show ready.
To new beginnings!

Thursday, July 2, 2009

Summer's here?

Now that summers here, there's no sun. Its been raining for weeks and everyday the 10 day forecast calls for more and more rain. Even if we can work on the boat outside because of the rain, we will try to chip away at everything we can do off the boat and in the garage.